전체시스템 구성도 |
 |
|
 |
|
H/W : CYCLOPS,
MILO, JUNO, ULTI-HEAD |
|
S/W : Flair,
Flair V4.0 for XP/NT, IKTRIX, MC Tools |
|
 |
|
|
하드웨어(H/W) |
| ㅇCYCLOPS |
| Mark Roberts Motion Control 제품군중 가장 큰 제품으로 한마디로 이 제품은 가장 큰범위, 가장 빠른
스피드 및 가장 다양한 기능을 가지고 있으며 정확하게 유압으로 작동하는 base를 갖춘 이 시스템은 스튜디오로 옮기거나
스튜디오내에서 재배치시나 레일위에 쉽게 위치 시킬 수 있으며 세계 Motion Control 업계의 표준으로 자리매김하고 있다. |
 |
|
PERFORMANCE |
|
|
|
| Axis
Name |
Range
of Travel |
Maximum Speeds |
|
|
|
| Track |
as requested |
3 metres per second |
| Rotate |
unlimited |
30 degrees per second |
| Lift |
full travel from |
|
| |
-1 metre to 5.5 metres |
25 degrees per second |
| Arm Extend |
2.1 metres |
1 metre per second |
| Outer Arm |
225 degrees |
45 degrees per second |
| Pan |
unlimited |
120 degrees per second |
| Tilt |
290 degrees |
120 degrees per second |
| Roll |
unlimited |
120 degrees per second |
|
|
|
|
|
CONNECTION |
| Power Requirements:3
phase,415 volts,20 KVA |
|
CAMERA FUNCTIONS |
| Camera Motor Control
including Vari-Speed |
| Zoom/Focus Control |
| Iris/FDX Control |
| Video Power |
| Video Signal (x2) |
| Sync Connection |
| Electronic Film Take-Up
Control |
|
OPTIONAL EQUIPMENT INCLUDES |
| Range of Model Mover
Systems -to control stage and prop movements |
| Hand-Wheels -r mote
hand-wheels for recording the movement of individual axis |
| Real Time XYZ (allows
output in real time of the camera position and orientation)for
|
| virtual studio and CGI
pr -visualisation applications |
| VTR Control -to control
the record functions of a VTR accurately |
| MC Tools -translation
software for CGI software packages and Motion Control |
| * Speeds and accelerations
achieved under test conditions |
| ㅇMILO |
| 전세계적으로 가장 많이 팔린 Motion
Control 시스템으로 빠른 스피드의 13 방향의 움직임 축을 가진 시스템 |
 |
|
|
PERFORMANCE |
|
|
|
| Axis
Name |
Range
of Travel |
Maximum Speeds |
|
|
|
| Track |
as requested |
2 metres per second |
| Rotate |
unlimited |
30 degrees per second |
| Lift |
+/-45 degrees |
24 degrees per second |
| Arm Extend |
1 metres |
38 cm per second |
| Outer Arm |
225 degrees |
40 degrees per second |
| Pan |
unlimited |
120 degrees per second |
| Tilt |
290 degrees |
120 degrees per second |
| Roll |
unlimited |
120 degrees per second |
|
|
|
|
|
WEIGHTS |
|
|
| Base
|
|
166 kg - 365 lbs |
| Turret
|
|
160 kg - 352 lbs |
| Long
Arm (with counter-weights) |
|
452 kg - 995 lbs |
| Standard
Arm |
|
130 kg - 286 lbs |
| Head
with Outer Arm |
|
63 kg - 139 lbs |
| Extend
Ballscrew |
|
28 kg - 62 lbs |
| Lift
Ballscrews |
|
39 kg - 86 lbs |
| Power
Supply and Driver Unit |
|
124 kg - 273 lbs |
|
|
|
|
|
CONNECTION |
|
|
| Power
Requirements |
|
110 - 240 volts,frequency 50
- 60 Hz |
| Generator
|
|
6.5 KVA (Milo +8 Model Movers) |
|
|
|
|
|
CAMERA FUNCTIONS |
| Camera Motor Control
including Vari-Speed |
| Zoom/Focus Control |
| Iris/FDX Control |
| Video Power |
| Video Signal (x2) |
| Sync Connection |
| Electronic Film Take-Up
Control |
|
OPTIONAL EQUIPMENT INCLUDES |
| High Precision or Standard
Track -and Ramp-Up Rails for both |
| Grip Sticks -for a repeatable
hand-held camera feel |
| Range of Model Mov r
Systems -to control stage and prop movements |
| Milo Long Arm -in 3
sections for ease of transportation |
| Hand-Wheels -r mote
hand-wheels for recording the movement of individual axis |
| Real Time XYZ (allows
output in real time of the camera position and orientation)-for
|
| virtual studio and CGI
pre-visualisation applications |
| VTR Control -to control
the record functions of a VTR accurately |
| MC Tools -translation
software for CGI software packages and Motion Control |
| Increased Axis Speeds
-some axes can be upgraded |
| * Speeds and accelerations
achieved under test conditions |
|
Standard Milo Arm |
| Lift height at lens
4m /0.75 (below ground level) |
|
Milo Long Arm |
| Lift height at lens
6m /2.75 (below ground level) |
| ㅇJUNO |
| 가장 최근의 Motion Control 시스템으로 독창적이고 간편하고 빠른 장비로 보통의 현관문을 통과할
정도로 충분히 작으며 또한 운송하기 쉬운 이상적인 장비로 어떤 장소에도 조립하기 쉽게 만들어져 있다. |
 |
|
|
PERFORMANCE |
|
|
|
| Axis
Name |
Range
of Travel |
Maximum Speeds |
|
|
|
| Track |
as required |
2.5 metres per second |
| Rotate |
540 degrees |
57 degrees per second |
| Lift |
+/-45 degrees |
40 degrees per second |
| Lift Height |
+3.1 metres to |
range is 2 metres |
|
-0.37 metres |
(but head can be adjusted) |
| Pan |
unlimited |
120 degrees per second |
| Tilt |
290 degrees |
120 degrees per second |
| Roll |
unlimited |
120 degrees per second |
|
|
|
|
|
WEIGHTS |
|
|
| Base
Unit |
|
130 kg - 286 lbs |
| Turret
Unit |
|
35 kg - 37lbs |
| Main
Arm |
|
90 kg - 198 lbs |
| Parallelogram |
|
50 kg - 110 lbs |
| Camera
Head |
|
63 kg - 138 lbs |
| Lift
Drive |
|
25 kg - 55 lbs |
| Counter-Weight |
|
150 kg - 330 lbs |
| Power
Supply Unit |
|
80 kg - 176 lbs |
|
|
|
|
|
CAMERA FUNCTIONS |
| Camera Motor Control
including Vari-Speed |
| Zoom/Focus Control |
| Iris/FDX Control |
| Video Power |
| Video Signal (x2) |
| Sync Connection |
| Electronic Film Take-Up
Control |
|
OPTIONAL EQUIPMENT INCLUDES |
| High Precision or Standard
Track -and Ramp-Up Rails for both |
| Grip Sticks -for a repeatable
hand-held camera feel |
| Range of Model Mover
Systems -to control stage and prop movements |
| Hand-Wheels -remote
hand-wheels for recording the movement of individual axes |
| Real Time XYZ (allows
output in real time of the camera position and orientation)-for
|
| virtual studio and CGI
pre-visualisation applications |
| VTR Control -to control
the record functions of a VTR accurately |
| MC Tools -translation
software for CGI software packages and Motion Control |
| * Speeds and accelerations
achieved under test conditions |
|
|
CONNECTION |
|
|
| Power
Requirements |
|
110 - 240 volts,frequency 50
- 60 Hz |
| Generator
|
|
6.5 KVA (Milo +8 Model Movers) |
|
|
|
|
|
소프트웨어(S/W) |
| ㅇFlair |
 |
|
| 최초의 메인 motion control
software로 DOS모드만 지원한다. |
| ㅇFlair V4.0 for XP/NT |
 |
|
| 최신의 메인 motion control
software로 XP/NT모드를 지원한다. |
| ㅇIKTRIX |
 |
|
| XSI 나 Maya에서 혁신적인 인터페이스를
가지고 Motion Control 움직임도 미리 볼 수 있게 |
| 해준다. |
| ㅇMC Tools |
| XYZ 데이터를 어떤 2D/3D 패키지로도
입출력이 가능하게 해준다. |
